LP36698,003. Left hand wheel for old design Pro Roller bag

SPECIAL NOTES!

Older design wheel shown in bottom right hand corner for reference (not included), this part - LP36698,003 is compatible.

We recommend you remove and only swap over the wheels. You can also leave the old nut on the old housing unless it is stripped. The new bolt is a different length so be sure to use it.

Please see the below instructions with numbered pictures to see how to fit your new wheels;

1. Unscrew the old wheel bolt, then remove the wheel.

2. The inside bearing may still be attached to the bracket, remove this by gently using a flat screwdriver to push it off. ( see pic 2 )

3. You should now have nothing attached to the bracket. (see pic 3 )

• Unscrew the new wheel bolt.

4. The new wheel can now be fitted to the old bracket, just push it into position.

5. Use the new wheel bolt to fix the wheel, do not overtighten as the wheel will not turn.

1. 2. 3. 

 4.  5.